Table of Contents
Advertisement
Connect on Demand
Keep Alive
Enable
Line-Dropped
Scheduling
Line-Dropped Period
Line-Dropped
Scheduling
Backup Interface
After the changes are completed, click "Apply" to save the configuration, or click "Cancel" to leave
without making any changes.
Transparent Bridge
If all Intranet IP addresses are applied as Internet IP addresses, and users don't want to substitute private
network IP addresses for all Intranet IP addresses (ex. 192.168.1.X), this function will enable users to
integrate existing networks without changing the original structure. Select the Transparent Bridge mode for
This function enables the auto-dialing function to be used for a PPTP dial
connection. When the client port attempts to connect with the Internet, the
device will automatically connect with the default ISP auto dial connection;
when the network has been idle for a period of time, the system will break
the connection automatically. (The default time for automatic break off
when no packets have been transmitted is five minutes).
This function enables the PPTP dial connection to redial automatically
when the connection has been disconnected. Users can set up the
redialing time. The default is 30 seconds.
The WAN disconnection schedule will be activated by checking this option.
In some areas, there is a time limitation for WAN connection service. For
example: the optical fiber service will be disconnected from 0:00 am to
6:00 am. Although there is a standby system in the device, at the moment
of WAN disconnection, all the external connections that go through this
WAN will be disconnected too. Only after the disconnected lines are
reconnected can they go through the standby system to connect with the
Internet. Therefore, to avoid a huge number of disconnection, users can
activate this function to arrange new connections to be made through
another WAN to the Internet. In this way, the effect of any disconnection
can be minimized.
Input the time rule for disconnection of this WAN service.
Input how long the WAN service may be disconnected before the newly
added connections should go through another WAN to connect with the
Internet.
Select another WAN port as link backup when port binding is configured.
Users should select the port that employs the same ISP.
32
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
