Table of Contents
Advertisement
After the configuration is completed, in the China Netcom Policy window users can select WANs in
combination to connect with Netcom.
Import Strategy:
A division of traffic policy can be defined by users too. In the "Import Strategy" window, select the WAN or
WAN group (ex. WAN 1) to be assigned and click the "Import IP Range" button; the dialogue box for document
importation will be displayed accordingly. A policy document is an editable text document. It may contain a
destination IP users designated. After the path for document importation has been selected, click "Import",
and then at the bottom of the configuration window click "Apply". The device will then dispatch the traffic to the
assigned destination IP through the WAN (ex. WAN 1) or WAN grouping users designated to the Internet.
To build a policy document users can use a text-based editor, such as Notepad, which is included with
Windows system. Follow the text format in the figure below to key in the destination IP addresses users want
to assign. For example, if the destination IP address range users want to designate is 140.115.1.1 ~
140.115.1.255, key in 140.115.1.1 ~ 140.115.1.255 in Notepad. The next destination IP address range should
be keyed in the next line. Attention! Even if only one destination IP address is to be assigned, it should follow
the same format. For example, if the destination IP address is 210.66.161.54, it should be keyed in as
210.66.161.54~210.66.161.54. After the document has been saved (the extension file name is .txt), users can
import the IP range of self-defined strategy.
41
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
