Table of Contents
Advertisement
IP Address：
This is to select which user is to be controlled. If only a single IP is to be
restricted, input this IP address, such as "192.168.1.100 to 100". The rule will
control only the IP 192.168.1.100. If an IP range is to be controlled, input the
range, such as "192.168.1.100 ~ 149". The rule will control IP addresses from
192.168.1.100 to 149. If all Intranet users that connect with the device are to
be controlled, input "0" in the boxes of IP address. This means all Intranet IP
addresses will be restricted. QoS can also control the range of Class C.
Direction：
Upstream: Means the upload bandwidth for Intranet IP.
Downstream: Means the download bandwidth for Intranet IP.
Server in LAN, Upstream: If a Server for external connection has been built in
the device, this option is to control the bandwidth for the traffic coming from
outside to this Server.
Server in LAN, Downstream: If there are web sites built in the Intranet, this
option is to control the upload bandwidth for the connections from outside to
this Server. For example, game servers have been built in many Internet
cafés. This rule can be used to control the bandwidth for connections from
outside to the game server of a café to update data. In this way, game players
inside the café will not be affected.
Min. & Max. Rate：
The minimum bandwidth: The rule is to guarantee minimum available
(Kbit/Sec)
bandwidth.
The maximum bandwidth: This rule is to restrict maximum available
bandwidth. The maximum bandwidth will not exceed the limit set up under
this rule.
Attention! The unit of calculation used in this rule is Kbit. Some software
indicates download/upload speed by the unit KB. 1KB = 8Kbit.
91
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
