Dest. IP:
Subnet Mask:
Gateway:
Hop Count:
Interface:
Add to List:
Delete Selected Item:
Show Table:
Apply:
Cancel:
Input the remote network IP locations and subnet that is to be
routed. For example, the IP/subnet is 192.168.2.0/255.255.255.0.
The default gateway location of the network node which is to be
routed.
This is the router layer count for the IP. If there are two routers under
the device, users should input "2" for the router layer; the default is
"1". (Max. is 15.)
This is to select "WAN port" or "LAN port" for network connection
location.
Add the routing rule into the list.
Remove the selected routing rule from the list.
Show current routing table.
Click "Apply" to save the network configuration modification
Click "Cancel" to leave without making any changes.
166
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r