Table of Contents
Advertisement
We also need to be familiar with other UI setting before using "Intelligent Power Saving".
Note:
1. 3G feature is disabled by default. Please go to USB Setting UI to enable 3G feature by choosing any
mode.
2. When the system is on Power Saving State, the system will be switched to Active State automatically during
daily Auto Self Test. The state switch will be logge, and the system will be back to Power Saving State after
the daily Auto Self Test is done.
3. The state switch will be logged in system lo, following user settings.
4. When WAN are disconnected, USB 3G must be switched to Active State for backup connection.
Choose theUSB port
USB port Auto Self Test feature.
No matter what sate the system is on, USB
port will automatically dial the 3G/3.5G
connection to get IP address at Auto Self
Test time. The test result will be logged in
system logs. After the test is done, USB
port will be switched back to the original
state setting.
Click the box the make all the setting
changes are logged.
57
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
