Table of Contents
Advertisement
Internal LAN IP
Range
Enable
Line-Dropped
Scheduling
Line-Dropped Period
Line-Dropped
Scheduling
Backup Interface
After the changes are completed, click "Apply" to save the configuration, or click "Cancel" to leave
without making any changes.
3G / 3.5G
Click "Edit" to start 3G/3.5G network connection configuration:
※3G feature is disabled by default. Please go to USB Setting UI to enable 3G feature by choosing any
mode.
Input the available IP range issued by ISP. If ISP issued two
discontinuous IP address ranges, users can input them into Internal
LAN IP Range 1 and Internal LAN IP Range 2 respectively.
The WAN disconnection schedule will be activated by checking this
option. In some areas, there is a time limitation for WAN connection
service. For example: the optical fiber service will be disconnected
from 0:00 am to 6:00 am. Although there is a standby system in the
device, at the moment of WAN disconnection, all the external
connections that go through this WAN will be disconnected too. Only
after the disconnected lines are reconnected can they go through the
standby system to connect with the Internet. Therefore, to avoid a
huge number of disconnection, users can activate this function to
arrange new connections to be made through another WAN to the
Internet. In this way, the effect of any disconnection can be
minimized.
Input the time rule for disconnection of this WAN service.
Input how long the WAN service may be disconnected before the
newly added connections should go through another WAN to connect
with the Internet.
Select another WAN port as link backup when port binding is
configured. Users should select the port that employs the same ISP.
34
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
