Table of Contents
Advertisement
Enable
Line-Dropped
Scheduling
Line-Dropped
Period
Line-Dropped
Scheduling
Backup Interface
After the changes are completed, click "Apply" to save the configuration, or click "Cancel" to leave
without making any changes.
PPPoE
This option is for an ADSL virtual dial-up connection (suitable for ADSL PPPoE). Input the user
connection name and password issued by ISP. Then use the PPP Over-Ethernet software built into the device
to connect with the Internet. If the PC has been installed with the PPPoE dialing software provided by ISP,
remove it. This software will no longer be used for network connection.
The WAN disconnection schedule will be activated by checking this option. In
some areas, there is a time limitation for WAN connection service. For example:
the optical fiber service will be disconnected from 0:00 am to 6:00 am. Although
there is a standby system in the device, at the moment of WAN disconnection,
all the external connections that go through this WAN will be disconnected too.
Only after the disconnected lines are reconnected can they go through the
standby system to connect with the Internet. Therefore, to avoid a huge number
of disconnection, users can activate this function to arrange new connections to
be made through another WAN to the Internet. In this way, the effect of any
disconnection can be minimized.
Input the time rule for disconnection of this WAN service.
Input how long the WAN service may be disconnected before the newly added
connections should go through another WAN to connect with the Internet.
Select another WAN port as link backup when port binding is configured. Users
should select the port that employs the same ISP.
28
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
