Table of Contents
Advertisement
address of the gateway is the same with the device MAC address. If not, the PC corresponding to the
MAC address is the source of attack.
Solutions for other device users are to make a two-way binding of the IP address and MAC address
from both of the PC and device ends in order to carry out the prevention work. However, this is more
complicated because the search for the IP and address and MAC increases the workload. Moreover,
there is greater possibility of making errors during the operation.
c) Bind the IP/MAC Address from Device End:
Enter "Setup" under DHCP page. On the down right corner of the screen, there is "IP and MAC Binding,"
where users may create IP and MAC binding. On "Enabled," click on "√" and select "Add to List." Repeat these
steps to add other IP addresses and MAC binding, followed by clicking "Apply" at the bottom of the page.
205
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
