Table of Contents
Advertisement
Example 1. How to set up the maximum download speed to 50 Kbit for the FTP protocol on all WAN
interfaces ?
Please refer to the following as a setup example. Click before both WAN1 and WAN2; then choose "FTP
[TCP/21~21]" in Service; for IP Address, put your LAN IP range (e.g.192.168.1.1~254); in "Direction" part,
open the dropdown box and choose Downstream. Import 2Kbit/Sec in Mini. Rate, which guarantees the
minimum bandwidth for FTP downloading. And import 50Kbit/Sec in Max. Rate for a maximum limitation.
Choose "Share total bandwidth with all IP addresses" in "Bandwidth sharing" method, which means that the
whole LAN users share a maximum 50Kbits/Sec download speed on the FTP protocol no matter how many
users are using in intranet. Click "Enable" and "Add to list", then this rule is successfully added.
93
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
