Table of Contents
Advertisement
All you have to do is to select the WAN (or WAN group) which is connected with Netcom; the device will then
automatically dispatch the traffic for Netcom through that WAN to connect with the Internet and dispatch traffic
for Telecom to go through the WAN connected with Telecom to the Internet accordingly. In this way, the traffic
for Netcom and Telecom can be divided.
Set WAN Grouping:
If more than one WAN is connected with Netcom, to apply a similar division of traffic policy to these
WANs, a combination for the WANs must be made. Click "Set WAN Grouping"; an interactive window
as shown in the figure below will be displayed.
Name:
Interface:
Add To List:
Delete selected:
Apply:
Cancel:
To define a name for the WAN grouping in the box, such as
"Education" etc. The name is for recognizing different WAN groups.
Check the boxes for the WANs to be added into this combination.
To add a WAN group to the grouping list.
To remove selected WANs from the WAN grouping.
Click "Apply" to save the modification.
Click "Cancel" to cancel the modification. This only works before
"Apply" is clicked.
40
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
