Table of Contents
Advertisement
Application Define-Add New Rule
Step 1：Name the Application
Step 2：Define the application by the URL, destination or the port number. The definable
parameter as below：
Dest. IP
If only a single IP is to be restricted, input this IP address, such as
"100.100.100.105". The rule will control only the IP 100.100.100.105. If an
IP range is to be controlled, input the range, such as "100.100.100.105~
200".
Dest. IP Group
Apply the Dest. IP Group from the [Group Management] function.
Domain Name
Use Domain Name to define the application, for example, input the
"speed.hinet.net" such as http://speed.hinet.net.
Set up the TCP、UDP port number or apply the port group from the [Group
Service Port
Management] function.
Step 3：Click
finish the setting.
Step 4: Apply your own application to the L7 management; you can see your own L7
application on the 'Application Define'.
to add your own L7 application to the list right side to
129
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
