Table of Contents
Advertisement
During 3G/3.5G load balance, the system will keep detecting the WAN port status. If the badwidth is _%
of the threshold to start load balance, 3G/3.5 USB dongle could return to power saving state.
For example, if we enter 10% on the following figure, when WAN 1 bandwidth is less than 9000Kbit
(10000Kbits X 10%), 3G/3.5G will return to power saving state.
B. Return condition:
When the trigger conditions no longer exist, 3G/3.5G USB dongle will return to power saving state.
Example 1: 3G/3.5G USB dongle is for WAN port backup only.
When both WAN1 and WAN2 return to connection, 3G/3.5G USB dongle will return to power saving state.
Example 2: 3G/3.5G USB dongle is for WAN port backup, and there are pre-defined threshold to start load
balance.
When WAN1 and WAN2 are conntected normally, and WAN1 bandwidth is less than 9000Kbit (10000Kbits
X 10%), 3G/3.5G will return to power saving state.
61
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r
Advertisement
Table of Contents
