BCI WW1020 Operation Manual page 79

The following is a list of cables, transducers and accessories used with the WW1020/WW1000
pulse oximeter.
WARNING! Use of accessories, transducers and cables other than those specified below
may result in increased emissions or decreased immunity of the systems.
BCI® Accessories
CAT. NO.
WW1025
Docking Station
WW1026
Printer (Must be used with Docking Station WW1025)
WW1089
USB interface cable
WW1090 Rechargeable battery pack, LI-Ion
WW1095 Universal AC mains adapter - 30W
1300 Sensor, Oximetry, Disposable, Adult Finger
1301 Sensor, Oximetry, Disposable, Pediatric. Finger, 15-45 kg
1302 Sensor, Oximetry, Disposable, Neonate/Small Infant, < 3 kg*
1303 Sensor, Oximetry, Disposable, Infant, 3-15 kg
3025 Sensor, Oximetry, Wrap, Infant, 3-15 kg
3026 Sensor, Oximetry, Wrap, Neonate/Small Infant, < 3 kg*
3043 Sensor, Oximetry, Universal 'Y'
3044 Sensor, Oximetry, Finger
3044S Spot Check Sensor, Reusable, Adult
WW3078 Sensor, Oximetry, Ear
3178 Sensor, Pediatric Finger, 5-45 kg
3178S Spot Check Sensor, Reusable, Pediatric
3311 Cable, Oximetry, 1.5 m (5 feet)
3339 PC adapter cable
3350 Printer adapter cable
3444 Sensor, Oximetry, Finger, Comfort Clip®
* The BCI® 1302 and 3026 oximetry sensors should not be used on neonatal patients with the
WW1000 monitor. Testing has not been conducted for the WW1000 for patients less than 30 days
old. These sensors may, however be used on older patients.
WARNING! The WW1020/WW1000 pulse oximeter should not be used adjacent to other
medical equipment. If such use is necessary, the system should be observed to
verify normal operation in the configuration it will be used.
Clinician's Operation Manual
Appendix A: Guidance and Manufacturer's Declaration
DESCRIPTION
A-5