Appendix A: Guidance And Manufacturer's Declaration; Guidance And Manufacturer's Declaration; Electromagnetic Emissions - Emissions Test - BCI WW1020 Operation Manual

Appendix A: Guidance and Manufacturer's Declaration

Guidance and Manufacturer's Declaration

The WW1020/WW1000 pulse oximeter is intended for use in the electromagnetic environment
specified in the tables within this appendix.
NOTE! The WW1020/WW1000 pulse oximeter system must be put into service according to
the provided EMC information to ensure proper operation.

Electromagnetic Emissions - Emissions Test

GUIDANCE AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC EMISSIONS
The WW1020/WW1000 pulse oximeter is intended for use in the electromagnetic environment
specified below. The customer or end user of the WW1020/WW1000 pulse oximeter should
ensure that it is used in such an environment.
EMISSIONS TEST
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions IEC
61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Clinician's Operation Manual
Appendix A: Guidance and Manufacturer's Declaration
COMPLIANCE
Group 1 The WW1020/WW1000 pulse oximeter uses
RF energy only for its internal function.
Therefore, its RF emissions are very low and
are not likely to cause any interference in
nearby electronic equipment.
Class B The WW1020/WW1000 pulse oximeter
is suitable for use in all establishments,
including domestic establishments and those
Class A
directly connected to the public low-voltage
power supply network that supplies buildings
Complies
used for domestic purposes.
ELECTROMAGNETIC ENVIRONMENT
GUIDANCE
A-1