How To Set Up Equipment - BCI WW1020 Operation Manual

How to Set Up Equipment

Refer to Figure 7-2 for the cable connections.
Power Input
Connector
USB Interface
Cable
Connect USB
Cable to Monitor
1. Connect the USB interface cable to the I / O or Power Input Connector on the oximeter or
Docking Station.
2. If using the WW1095 AC Power Supply, connect it to the PC cable power input connector.
3. Connect the interface cable to the PC's USB port.
4. The oximeter is now ready to download data.
The BCICP1030 data output format is available upon request.
1
NOTE! Review the PC communication program's instructions to determine how to
save the data to the PC.
Clinician's Operation Manual
Connect AC Power
Here (Optional)
Figure 7-2: Connecting to a PC using USB Interface Cable
Chapter 7: PC Communication Setup
AC Power Supply
(Optional)
USB Interface
Cable to PC
7-3