Examples - HP 2/8q Fibre Channel User Manual

Command Line Interface

Examples

The following is an example of the Show Chassis command:
154
support
Executes a series of commands that display a complete description of the switch, its
configuration, and operation. The display can be captured from the screen and used
for diagnosing problems. This keyword is intended for use at the request of your HP
Authorized Service Provider. The commands that are executed include the following:
— Alias List
— Config List
— Date
— History
— Ps
— Show (About, Alarm, Backtrace, Chassis, Config Port,
Config Switch, Config Threshold, Dev, Dev Settings,
Domains, Donor, Fabric, Log, Log Archive, Log Settings,
Lsdb, Mem, Ns, Perf, Port, Setup Mfg, Setup Snmp, Setup
System, Steering, Switch, Topology, Users)
— Uptime
— User Accounts
— Whoami
— Zoneset (Active, List)
— Zoning (History, Limits, List)
switch
Displays switch operational information.
topology
Displays all connected devices.
users
Displays a list of logged-in users. This is equivalent to the User List command.
version
Displays an introductory set of information about operational attributes of the switch.
This keyword is equivalent to the About keyword.
2/8q FC Switch #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius
PowerSupplyStatus (1)
HeartBeatCode
HeartBeatStatus
23
Good
1
Normal
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide