Table of Contents
Advertisement
Name Server data window
The Name Server data window displays information about devices (hosts and storage targets)
connected to the switch. To open the Name Server data window from the topology or faceplate
display, click the Name Server tab below the data window. In the topology display, if no
switches are selected, the name-server entries for the entire fabric are displayed in the data
window; if switches are selected, only the devices attached to the selected switches are
displayed. In the faceplate display, only the devices attached the switch being viewed are
displayed. See
Configuring ports
The port settings or characteristics are configured using the Port menu and the Port Properties
dialog box as shown in
or more ports, and then select Port > Port Properties.
Figure 31: Port Properties dialog box
The Port Properties dialog box displays the switch name and the selected port(s). Use the Port
Properties dialog box to view and change the following:
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Table 10
for a description of the Name Server data window entries.
Figure
Port States parameters
Port Speed parameters
Port Type parameters
Interoperability Credits parameters
I/O Stream Guard parameters
Device Scan parameter
Changing the port symbolic name
Extending port credits
31. To open the Port Properties dialog box for a port, select one
Switch Manager
85
Advertisement
Table of Contents
