Commands; Command Line Completion - HP 2/8q Fibre Channel User Manual

Command Line Interface

Commands

The command is followed by one or more keywords. Consider the following rules and
conventions:
The command-line completion feature makes entering and repeating commands easier.
Table 43
Table 43: Command line completion
Tab
Up Arrow
Down Arrow
Ctrl-A
Ctrl-E
The command set performs monitoring and configuration tasks. Commands related to
monitoring tasks are available to all account names. Commands related to configuration tasks
are available only within an admin session. An account must have Admin authority to enter the
Admin Start command, which opens an admin session. See the
page 117.
The commands and their page numbers are listed in
Table 44: Commands listed by Authority Level
Help command
History command
Ping command
Ps command
Quit command
Show command
Show Config
command
Show Log command
Show Perf command
Show Setup command
Uptime command
116
Commands and keywords are case insensitive.
Required keyword values appear in standard font: [value]. Optional values are shown in
italics: [value].
Underlined portions of the keyword in the command format indicate the abbreviated form
that can be used. For example the Delete keyword can be abbreviated Del.
describes the command-line completion keystrokes.
Keystroke
Monitoring commands
Completes the command line. Enter at least one character and
press Tab to complete the command line. If more than one
possibility exists, press Tab again to display all possibilities.
Scrolls backward through the list of previously entered
commands.
Scrolls forward through the list of previously entered
commands.
Moves the cursor to the beginning of the command line.
Moves the cursor to the end of the command line.
page 125 Admin command
page 126 Alias command
page 130 Config command
page 130
Create Support
command
page 131 Date command
page 150
Firmware Install
command
page 160 Hardreset command
page 163 Hotreset command
page 165 Image command
page 166 Lip command
page 171 Passwd command
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Effect
"Admin
Table 44.
Administrative commands
command" on
page 117
page 118
page 119
page 122
page 123
page 123
page 124
page 126
page 127
page 129
page 129