Table of Contents
Advertisement
Table 56: System configuration settings (Continued)
RemoteLogHostAddress
NTPClientEnabled
NTPServerAddress
Examples
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Entry
The following is an example of the Set Setup SNMP command:
2/8q FC Switch #> admin start
2/8q FC Switch (admin) #> set setup snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency, alert, critical, error, warning, notify, info, debug, mark
SNMPEnabled
Contact
Location
Trap1Address
Trap1Port
Trap1Severity
Trap1Version
Trap1Enabled
Trap2Address
Trap2Port
Trap2Severity
Trap2Version
Trap2Enabled
Trap3Address
Trap3Port
Trap3Severity
Trap3Version
Trap3Enabled
Trap4Address
Trap4Port
Trap4Severity
Trap4Version
Trap4Enabled
The IP address of the host that will receive the switch event log
information if remote logging is enabled. The default is
10.0.0.254.
Enables (True) or disables (False) the Network Time Protocol
(NTP) client on the switch. This client enables the switch to
synchronize its time with an NTP server. This feature supports
NTP version 4 and is compatible with version 3. An Ethernet
connection to the server is required and you must first set an
initial time and date on the switch. The synchronized time
becomes effective immediately. The default is False.
The IP address of the NTP server from which the NTP client
acquires the time and date. The default is 10.0.0.254.
(True / False)
(string, max=64 chars)
(string, max=64 chars)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(1 / 2)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(1 / 2)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(1 / 2)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(1 / 2)
(True / False)
Command Line Interface
Description
[True
]
[<sysContact undefined]
[sysLocation undefined]
[10.20.71.15
]
[162
]
[warning
]
[2
]
[False
]
[0.0.0.0
]
[162
]
[warning
]
[2
]
[False
]
[0.0.0.0
]
[162
]
[warning
]
[2
]
[False
]
[0.0.0.0
]
[162
]
[warning
]
[2
]
[False
]
149
Advertisement
Table of Contents
