Network Properties Dialog Box Messages; Network Properties Dialog Box; Add A Fabric Messages - HP 2/8q Fibre Channel User Manual

Hewlett-packard fibre channel switch user guide
Hide thumbs Also See for 2/8q Fibre Channel:
Table of Contents

Advertisement

Switch Manager
Table 29: Add a Fabric messages (Continued)
The maximum number of management
sessions on the entry switch has been
exceeded.
Unable to login to switch. Reason: ...
Unknown host
Verify correct user name and password and
retry.

Network Properties dialog box messages

Table 30: Network Properties dialog box messages
Attempt to change snmp community strings
failed.
or
Attempt to change syslog configuration failed.
Unable to apply invalid syslog host address.
98
Message
hostname
.
Message
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
User action
The application cannot establish a session with
the fabric because too many sessions are
already open. Close any other application or
Telnet sessions to the fabric and try again.
Verify that the user name and password
entered in the dialog box are valid login
information for an account on the switch
specified by the IP address box.
Verify that the host name specified for the IP
address is a valid hostname for a switch in the
fabric, and that the switch is reachable from
the user's workstation.
Either the user name or password is incorrect.
Enter the correct values and retry.
User action
Verify that the data is valid, that the user has
permissions to modify the configuration on the
switch, that the switch is reachable in the
fabric, and that the fabric is reachable from
the user's workstation, and then retry the
configuration change.
Verify that either a syntactically correct IP
address was specified for the syslog host, or
that a host name was specified for a valid
syslog host that is reachable from the user's
workstation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 2/8q fibre channel

Table of Contents