Table of Contents
Advertisement
Switch Manager
Setting Switch Manager preferences
Using the preferences settings to:
To set preferences for your Switch Manager sessions:
1. Select File > Preferences. The Preferences dialog box is displayed
Figure 4: Preferences dialog box
2. Enter or browse for paths to the working directory and browser.
3. Select the preferences you want in the Application-wide Options area.
4. Click OK.
24
Change the location of the working directory in which to save files.
Change the location of the browser used to view the online help.
Choose the fabric discovery interval. The fabric discovery interval is how often the Switch
Manager application receives information from the fabric. Choose 30 (default), 45, or 60
seconds. The smaller the interval, the more often the application talks to the switch and
thus the greater impact to performance.
Enable (default) or disable the view file auto save and load feature. See
Manager" on page 22 for more information on the default fabric view file.
Enable (default) or disable the use of the Initial Start Dialog—Switch Manager dialog box
at the beginning of a Switch Manager session. See
for information about the Initial Start Dialog—Switch Manager dialog box. After a default
fabric view file is created, this setting has no effect.
Enable (default) or disable the Event Browser. See the
Event Browser is enabled using the Preferences dialog box, the next time Switch Manager
is started, all events from the switch alarm log is displayed. If the Event Browser is
disabled when Switch Manager is started and later enabled, only those events from the
time the Event Browser was enabled and forward are displayed.
Choose the default port view when opening the faceplate display. You can set the
faceplate to reflect the current port type (default), port speed, port operational state, or port
transceiver media. Regardless of the default port view you choose, you can change the
port view in the faceplate display by opening the View menu and then selecting a different
port view option. See
"Port status" on page 80
"Starting Switch Manager" on page 21
for more information.
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
"Exiting Switch
"Event
Browser" on page 41. If the
(Figure
4).
Advertisement
Table of Contents
