Removing A Fabric; Opening A Fabric View File - HP 2/8q Fibre Channel User Manual

Figure 12: Add a New Fabric dialog box
2. Enter a fabric name (optional) and the IP address of the switch through which to manage
3. Enter an account name and password. The factory login name and password are: admin,
4. Click Add Fabric.
Note:

Removing a fabric

To delete a fabric file from the database:
1. Select a fabric in the fabric tree.
2. Select Fabric > Remove Fabric.

Opening a fabric view file

A fabric view file is one or more fabrics saved to a file.
1. Select File > Open View File, or click Open. If the fabric you are currently viewing has
2. Enter the name of the file to open, and enter a file password, if a password was entered
3. Click OK.
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
the fabric.
password. The password is for the switch and is stored in the switch firmware.
— See "User account
— See "Managing user
information about creating user accounts.
A switch supports a combined maximum of 19 logins or sessions as follows:
Four logins or sessions for internal applications such as management server and SNMP
Nine high priority Telnet sessions
Six logins or sessions for Switch Manager inband and out-of-band logins, and Telnet logins.
Additional logins are refused.
changed, you are prompted to save the changes to the fabric view file with the Save View
dialog box before opening a different view file.
when this fabric view file was saved.
security" on page 35 for information about user authentication.
accounts" on page 58 or the
Switch Manager
"User command" on page 171 for
37