Restoring The Factory Default Configuration; Factory Default Configuration Settings; Port Type - HP 2/8q Fibre Channel User Manual

Restoring the factory default configuration

You can restore the switch and port configuration settings to the factory default values. To
restore the factory configuration on a switch, select Switch > Restore Factory Defaults.
Table 18
Restoring the switch to the factory default configuration does not restore the account name and
password settings. To restore user accounts, select Maintenance > Reset Password File.
Refer to "Recovering a Switch" in the Installation Guide for your switch for information about
maintenance mode and the Maintenance menu.
Table 18: Factory default configuration settings
Symbolic Name
Administrative State
Domain ID
Domain ID Lock
In-band Management
Broadcast Support
Resource Allocation Timeout (R_A_TOV)
Interop Mode
I/O Stream Guard
Device Scan Enabled
Interop Credits
Error Detect Timeout (E_D_TOV)
SNMP Enabled
SNMP Proxy
IP Address
Subnet Mask Address
Gateway Address
Network Discovery
Remote Logging
Remote Logging Host Ip Address
Contact
Location
Trap Enabled
Trap Port
Trap Address
Trap Community
Read Community
Write Community
Port State
Port Speed

Port Type

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
lists the factory default switch configuration settings.
Setting Value
2/8q FC Switch
Online
1
False
True
Enable
10000 milliseconds
True (not supported)
Disabled
True
0 (not supported)
2000 milliseconds
True
True
10.0.0.1
255.0.0.0
10.0.0.254
Static
False
10.0.0.254
Undefined
Undefined
False
162
Trap 1: 10.0.0.254; Traps 2-5: 0.0.0.0
Public
Public
Private
Online
Auto-detect
GL
Switch Manager
77