Headset Operation; Headset Volume; Default Handsfree Audio Path - Avaya 9500 Series User Manual

9. Headset/Handsfree Operation

9.1 Headset Operation

Your phone has a headset socket located under the phone. This is suitable for the connection of phone headsets that
connect via an HIS headset cable.
· Pressing the HEADSET key can be used to answer a call through the headset. It can also be pressed to end a
headset call.
· The key is lit when there is a call connected through the headset.
· The key can also be pressed to turn a call that has already been answered using the handset or handsfree into a
headset call.
· If there are no currently connected calls to which you are talking, a call answered by pressing its appearance button
is connected either handsfree or through the headset according to the phone's
· If there is already a connected call to which you are talking through the headset, answering another call by
pressing the appearance button will answer that call using the headset.
You can adjust the following handsfree settings:

Headset Volume

·
Headset Automatic Gain Control On/Off
·
Default Audio Path
·
9.1.1 Headset Volume
While talking via the headset, you can adjust the volume of the incoming call.
1. With the call connected on the headset, press the
+
2. Use the plus and
3. The display returns to normal after a few seconds.

9.1.2 Default Handsfree Audio Path

By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's
speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so that the audio is played through the headset by
default rather than the speaker.
1. Press the MENU button.
2. Use the up and down
3. Press Select.
4. Use the up and down
5. Press Change to change the setting between Headset and Speaker.
6. When completed, press the Save soft key.
7. Press the Back / Exit soft keys to exit the menus.
9500 Series User Guide
IP Office
113
44
–
minus keys to adjust the volume.
arrow keys to highlight Call Settings.
arrow keys to highlight Audio Path.
113
key.
audio path setting .
44
Issue 05d (05 April 2012)
Page 44