Starting A Conference; Adding A Call To A Conference; Viewing Conference Details - Avaya 9500 Series User Manual

8. Conference Calls
The telephone system supports multiple conference calls, with additional parties addable to any conference call until the
system's conference capacity is reached. A maximum of 64 parties in any particular conference call is supported.
Conference resources are also used for call recording and other features, reducing the available conference capacity for
ordinary conference calls.
Some conference controls, for example dropping other parties, only apply to conferences started on the same phone
system as your extension.
Note: If you are the only internal user in the conference, depending on your telephone system's configuration, dropping
yourself might end the conference. Consult your system administrator for details.
Default Short Codes
Short codes are numbers that you can dial to enable and disable various features. Your system administrator will confirm
any additional short codes that may have been configured for your use.
· Conference Held Calls: *47
Start a conference between yourself and any calls that you have on hold.

8.1 Starting a Conference

If you have a connected call and any held calls, pressing the Conf soft key will start a conference between you and those
calls.
If you do not already have a held call, you can use the process below to start a conference.
1. Make a call to the first party or answer a call.
2. Press the Conf soft key. The current call is automatically put on hold.
3. Dial the party that you want to add to the conference.
4. If they answer and want to join the call, press Conf again.
5. If they do not want to join the call or do not answer, press Drop and then press the appearance key of the held
call.

8.2 Adding a Call to a Conference

You can add parties to an existing conference.
1. Press HOLD to put the conference on hold. This does not affect the other conference parties who can continue
talking to each other.
2. Press an available appearance key on which to make a call.
3. Dial the party that you want to add to the conference.
4. If they answer and want to join the call, press Conf again.
5. If they do not want to join the call or do not answer, press Drop and then press the appearance key of the held
call.

8.3 Viewing Conference Details

You can display a list of the parties involved in a conference call.
1. If not already displayed, press the
2. Press the Details soft key.
· To scroll through the list of callers in the conference, use the
· To drop a caller from the conference, highlight them and press Drop.
· To mute a caller, highlight them and press Mute. Repeat this to unmute them.
· To return to the call display, press the Back soft key.
9500 Series User Guide
IP Office
up or down arrow key to display the conference call.
up and down arrow keys.
Issue 05d (05 April 2012)
Page 40