Demonstration Applications; Product Presentation; Figure 16. Card Removal; Figure 17. Product Presentation Is Ready To Start - STMicroelectronics STM32100E-EVAL User Manual

Table of Contents

Running the demonstration

2.7

Demonstration applications

The following section provides a detailed description of each part of the demonstration.

In the demonstration, the core runs at HCLK = 24 MHz. Four LEDs: LD1, LD2, LD3 and LD4

flash throughout the demonstration at a frequency depending on the core clock.

2.7.1

This part of the demonstration presents all the STM32F100ZET6 embedded peripherals

and features. The product presentation is made with a slide show. Each slide is associated

with a dedicated speech. When you start the product presentation, the first slide appears

and the corresponding speech starts. Once the speech is finished, the second slide is

displayed accompanied by its speech and so on until the last slide.

When the Product presentation menu is selected, the message shown in

displayed on the LCD screen.

22/49

Err: SDCard Removed

Please check SD Card

Press JoyStick UP to

Restart the demo...

Press SEL to start

When presentation

starts use RIGHT and

LEFT to go to the

next/previous slide

and SEL to exit

Doc ID 18064 Rev 1

UM1011

Figure 17

Table of Contents

Do you have a question about the STM32100E-EVAL and is the answer not in the manual?