Table of Contents
Advertisement
3
SW demonstration applications
•
To develop a software application for the
with the reference demonstration applications provided within the BlueNRG DK software package available
on the STEVAL-IDB005V1 web page. The BlueNRG DK software package supports both BlueNRG and
BlueNRG-MS devices.
•
Unzip the file, launch the related installer and follow installation steps (the default installation path is C:\
\Program Files (x86)\\STMicroelectronics\\BlueNRG DK x.x.x)
•
Wait for the package installation to complete.
•
The Projects folder in BlueNRG DK SW package contains the available BlueNRG-MS demonstration
applications, IAR projects, sources and header files.
•
IAR Embedded Workbench for ARM (EWARM) tool V7.40.3 or later is needed for building and downloading
software applications running on the STM32L151RBT6 microcontroller.
Note:
For a description of the available
BlueNRG-MS development kits user manual (UM1870).
The BlueNRG-MS_SensorDemo.hex prebuilt binary image is also provided within the BlueNRG DK software
package, in the Firmware folder.
UM1887 - Rev 3
STEVAL-IDB005V1
BlueNRG-MS
demonstration applications and supported platforms, refer to
SW demonstration applications
evaluation board, it is recommended to start
UM1887
page 6/12
Advertisement
Table of Contents
Need help?
Do you have a question about the STEVAL-IDB005V1 and is the answer not in the manual?
Questions and answers