Demonstration Applications; Product Presentation; Figure 17. Product Presentation Is Ready To Start; Figure 18. First Presentation Slide - STMicroelectronics STM32100B-EVAL User Manual

UM0891
2.7

Demonstration applications

The following section provides a detailed description of each part of the demonstration.
In the demonstration, the core runs at HCLK = 24 MHz. Four LEDs: LD1, LD2, LD3 and LD4
flash throughout the demonstration at a frequency depending on the core clock.
2.7.1

Product presentation

This part of the demonstration presents all the STM32F100VB embedded peripherals and
features. The product presentation is made with a slide show. Each slide is associated with
a dedicated speech. When you start the product presentation, the first slide appears and the
corresponding speech starts. Once the speech is finished, the second slide is displayed
accompanied by its speech and so on until the last slide.
When the Product presentation menu is selected, the message shown in
displayed on the LCD screen.

Figure 17. Product presentation is ready to start

Product presentation slides
The presentation is composed of 14 slides where all features and advantages of the
STM32F100VB are listed.
respectively.

Figure 18. First presentation slide

Press SEL to start
When presentation
starts use RIGHT and
LEFT to go to the
next/previous slide
and SEL to exit
Figure 18 and Figure 19
Doc ID 16982 Rev 1
Running the demonstration
show the first and last slides,
Figure 17 is
21/48