Configure The Network Parameters - CyberData 11021 Operation Manual

2.3.3 Configure the Network Parameters

1. Click the Networking button to open the Network Configuration page
Note
2. On the Network Configuration page, enter values for the parameters indicated in
Web Page Item
Network Settings
IP Addressing*
IP Address*
Subnet Mask
Default Gateway
DNS Server 1*
DNS Server 2*
Operations Guide
Figure 2-17. Network Configuration Page
Figure 2-17 shows the factory default settings.
Table 2-6. Network Configuration Parameters
930274C
Description
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to Step 3.
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
Enter the DNS Server 1 address.
Enter the DNS Server 2 address.
Link to the Home page.
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
(Figure 2-17).
Table
Table 2-6 . If you select DHCP,
CyberData Corporation
27
2-6.