Log In To The Configuration Home Page - CyberData 11021 Operation Manual

2.3.1 Log in to the Configuration Home Page

1. Open your browser to the V2 Speaker IP address.
Note
Note
Note
Note
Operations Guide
If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Make sure that the PC is on the same IP network as the V2 Speaker.
You may also download CyberData's VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData's VoIP Discovery Utility program is available on the VoIP V2 Speaker product
page at:
http://www.cyberdata.net/support/voip/index.html
The Speaker ships in DHCP mode. To get to the Home page, use the discovery utility to
scan for the device on the network and open your browser from there.
930274C
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
CyberData Corporation
19