Configure The Network Parameters - CyberData 930274L Operation Manual

2.3.4 Configure the Network Parameters

1. Click the Networking button to open the Network Configuration page
2. On the Network Configuration page, enter values for the parameters indicated in
Stored Network Settings
IP Addressing*
IP Address*
Subnet Mask
Default Gateway
Operations Guide
Figure 2-14. Network Configuration Page
Table 2-7. Network Configuration Parameters
Web Page Item
Shows the settings stored in non-volatile memory.
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
930274L
Description
Step 3.
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
(Figure 2-14).
Table
Table 2-7
. If you select DHCP,
CyberData Corporation
26
2-7.