CyberData 11180 Installation Quick Reference
Push-to-talk v2 ceiling speaker, ral 9002, gray white, standard, ral 9003, signal white, optional
Hide thumbs
Also See for 11180:
- Operation manual (94 pages) ,
- Installation quick reference (4 pages) ,
- Operation manual (95 pages)
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Mounting Template
Speaker Hole Diameter:
Screw Hole Diameter:
Dimensions are in inches [millimeter]
© 2014, CyberData Corporation, ALL RIGHTS RESERVED
120°
VoIP Speaker
7.50 [190.5]
0.1875 [4.75]
4.00 [101.6]
930467E
Quick Reference
Installation Quick Reference
The IP Endpoint Company
Push-to-Talk V2 Ceiling Speaker
011180, RAL 9002, Gray White, Standard
011181, RAL 9003, Signal White, Optional
Parameter
IP Addressing
a
IP Address
Web Access Username
Web Access Password
a
Subnet Mask
a
Default Gateway
a. Default if there is not a DHCP server present.
Typical System Installation
802.3af Compliant Ethernet Switch
1
2
Remote Call Button
Push-to-Talk Speaker
IP Speaker
Getting Started
•
Download the Push-to-Talk V2 Ceiling Speaker Operations Guide PDF file from the Documentation page at:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2ptt/docs.html
•
Create a plan for the locations of your speakers.
•
WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes.
•
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•
WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant.
•
WARNING: The Push-to-Talk Speaker enclosure is not rated for any AC voltages!
Parts
(1) Speaker Assembly
(1) Drop Ceiling Mounting Kit
(3) #8 Nylon Thumb Nuts
(1) Template
(3) #8 Fender Washers
(3) 8-32 x 1 1/4" Mounting
Screws
* See the last page
of this document
Quick Reference
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
3
4
5
6
IP Phone
IP PBX Server
(1) Drywall Mounting Kit
(1) Call Button Assembly
(3) Plastic Ribbed Anchors
(1) Wall Mounting Kit
(3) #8 Sheet Metal Screws
(2) Mounting screws
930467E
© 2014, CyberData Corporation, ALL RIGHTS RESERVED
Advertisement
Related Manuals for CyberData 11180
Summary of Contents for CyberData 11180
- Page 1 Installation Quick Reference The IP Endpoint Company Push-to-Talk V2 Ceiling Speaker 120° 011180, RAL 9002, Gray White, Standard 011181, RAL 9003, Signal White, Optional Parameter Factory Default Setting IP Addressing DHCP VoIP Speaker IP Address 10.10.10.10 Mounting Template Web Access Username...
- Page 2 For drywall mounting, use the three #8 Features SHEET METAL SCREWS to secure the speaker. Microphone * For weak ceiling tile, CyberData offers a reinforcing mount (CyberData part number 010991A). Network Link/Activity LED (yellow) Speaker Status LED (green) A solid light confirms that the speaker is operational.
- Page 3 (Metal) (Metal) 2. Using a wall board saw or matt knife, cut along the As an option to the CyberData V2 speaker, the V2 Remote Call Button enables calls to the V2 Speaker that stencil line. Mounting can be initiated or answered from a remotely-mounted switch.
- Page 4 6. Mount the flush mount wall plate to the One-Gang (Metal) (Metal) Box. Optional Gasket Remote Call Button Remote Call Assembly Mounting Screw (2x) Button Assembly © 2014, CyberData Corporation, ALL RIGHTS RESERVED 930467E Quick Reference Quick Reference 930467E © 2014, CyberData Corporation, ALL RIGHTS RESERVED...