2.3.4 Log in to the Configuration Home Page
1. Open your browser to the InformaCast Enabled Speaker with Talk-Back IP address.
Note
Note
Note
Note
2. When prompted, use the following default Web Access Username and Web Access
Operations Guide
If the network does not have access to a DHCP server, the device will default to an IP
address of 192.168.1.23.
Make sure that the PC is on the same IP network as the InformaCast Enabled Speaker with
Talk-Back.
You may also download CyberData's VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData's VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
The device ships in DHCP mode. To get to the Home page, use the discovery utility to scan
for the device on the network and open your browser from there.
Password to access the Home Page
Web Access Username: admin
Web Access Password: admin
Installing the InformaCast Enabled Speaker with Talk-Back
(Figure
2-13):
932010A
Device Configuration
CyberData Corporation
23
Need help?
Do you have a question about the InformaCast 011396 and is the answer not in the manual?