Ipsec; Configuring Ipsec - Xerox B205 User Manual

IPSec

Internet Protocol Security (IPSec) is a group of protocols used to secure Internet Protocol (IP)
communications. The IPSec feature authenticates and encrypts each IP data packet.
If you select IPSec, all printer traffic uses IPSec protocols, including:
• DHCP v4/v6 (TCP and UDP)
• DNS (TCP and UDP)
• FTP (TCP)
• HTTP (Scan Out, TCP port 80)
• HTTPS (Scan Out, TCP port 443)
• HTTPS (Web Server, TCP port 443)
• ICMP v4/v6

Configuring IPSec

1. In Xerox CentreWare
®
2. Click IPSec.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to
3. To enable the protocol, for Protocol, select Enabled.
Note: To enable IPSec, enable SSL and connect to device using HTTPS.
4. To remove IPSec connections, click Flush All IPSec Connections.
For Shared Secret, enter the shared key value.
5.
6. For Verify Shared Secret, re-enter the shared key value.
To save the new shared key, select Select to save new Shared Secret.
7.
8. Click Apply.
Internet Services, click Properties
®
Accessing the Xerox CentreWare
®
• IPP (TCP port 631)
• LPR Print (TCP port 515)
• Port 9100 Print (TCP port 9100)
• SMTP (TCP/UDP port 25)
• SNMP (TCP/UDP port 161)
• SNMP Traps (TCP/UDP port 162)
• WS-Discovery (UDP port 3702)
Security.

Internet Services Administrator
®
Xerox B205 Multifunction Printer
®

IPSec

Account.
228
User Guide