Network Authorization - Xerox ColorQube 9301 System Administrator Manual

Enable and configure Netware settings. For details, see
®
1. On the Xerox Access Setup page, click Edit next to Authentication Servers.
Under Authentication Type, select NDS (Novell).
2.
3. Click Add New.
Under Default Tree/Context, type the details in the Tree and Context fields.
4.
5. Click Save Server.
6. To specify server settings for an alternate authentication server, click Add New.
To copy the settings from another server, select a server from the list and click Copy From.
7.
8. Click Edit to update the settings.
Configuring Authentication Server Settings for SMB
®
Access Setup page, click Edit next to Authentication Servers.
1. On the Xerox
2. Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).
3. Click Add New.
4. Under Domain, type the domain name of your authentication server.
5. If you want to specify domain controller IP addresses or host names, select Optional Information.
Address options appear.
6. Select the address type. Options are IPv4 Address, or Host Name.
7. Type the appropriately formatted address and port number. The default port number is 137.
8. Click Save Server.
9. To specify server settings for an alternate authentication server, click Add New.
10. To copy the settings from another server, select a server from the list and click Copy From.
11. Click Edit to update the settings.
Configuring Authentication Server Settings for LDAP
®
1. On the Xerox Access Setup page, click Edit next to Authentication Servers.
2. Under Authentication Type, select LDAP.
3. Click Add New.
Configure LDAP server settings and click Apply.
4.
5. To configure LDAP settings for a previously added LDAP server, click Edit next to the LDAP server in
the list.
A book icon appears in the list next to the LDAP server that is used for Network Address Book queries.
To specify server settings for an alternate authentication server, click Add New.
6.
7. To copy the settings from another server, select a server from the list and click Copy From.
8. Click Edit to update the settings.

Network Authorization

When Remotely on the Network is selected as the authorization method, the printer references an
authorization server for authorization information for the authenticated user.
NetWare on page 23.
ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Security
67