Omron 3G3MX2 User Manual page 206

5-7 Digital Operator/Operation Functions
No.
8
9
10
11
12
13
14
5
15
Note: The comma "," in the Display requirements means OR.
User Setting (b037=02)
Displays only the parameters optionally set in U001 to U032.
In addition to U001 to U032, d001, F001, b037, b190 and b191 are displayed.
Data Comparison Display (b037=03)
Displays only the parameters changed from the factory default.
All monitors (d***) and F001, b190 and b191 are always displayed.
5-89
Display requirements
Displayed when DC A051 = 01, 02 or
injection braking is used C001 to C007 = 07
Displayed when PID is
A071 = 01, 02
used
Displayed when Co-
inverter communication C096 = 01, 02
is used
Displayed during curved
acceleration/ A097, A098 = 01 to 04
deceleration
Displayed when
controlled deceleration b050 = 01, 02, 03
on power loss is used
Displayed when the
brake control function is b120 = 01
used
Displayed when the
overvoltage suppression
b130 = 01, 02
function during
deceleration is used
Displayed during simple
P003 = 01
position control is used
Parameters displayed when the
applicable conditions are met
A052 to A059
d004, A072 to A079, A156, A157, C044,
C052, C053
C098 to C100, P140 to P155
A131, A132, A150 to A153
b051 to b054
b121 to b127
b131 to b134
d008, P004, P011, P012, P015, P026,
P027, P060 to P073, P075, P077, H050,
H051
SYSDRIVE MX2 Series USER'S MANUAL (3G3MX2-A@@@@)