Table of Contents
Advertisement
REDUCTION/
ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or
manually with the COPY RATIO key. The zoom function enables precise copy ratio selection from 50%
to 400% in 1% increments.
q
The allowable copy ratio range is limited to the following conditions:
Options
When the SPF or RSPF is being used.
When the dual function board is installed.
When the dual function board is installed, and the SPF or RSPF
is being used.
Automatic selection
q
When the auto image function is enabled, the reduction or enlargement ratio cannot be selected
manually.
1
Place an original on the platen glass and close the platen cover.
q
The original size will be automatically detected and indicated in the display. If the original
is a non-standard size, it cannot be detected. In this case, press the SPECIAL
FUNCTION key to enter the original size. See page 24.
2
Use the PAPER SELECT key to select the paper tray with the desired
paper size.
q
This feature will not work when copy paper of non-standard size is used.
Copy ratio range
50% to 200%
25% to 400%
50% to 200%
2
31
Advertisement
Table of Contents
