Initial Startup Parameters - Powerware 9170 User Manual

UPS Startup

Initial Startup Parameters

The first time the UPS is turned on, you must set or verify certain
operating parameters before placing the UPS into operation. Use the
following procedure to set these initial configuration parameters.
1.
2.
3.
72
Enter the correct user security password: 0377. Move left and
right by pressing the buttons below the <- and -> on the
display. To change the value of the selected digit, press the
and buttons. When the password shows 0377, press the
B
button.
ENTER PASSWORD
Password - 0000
<- ->
Select the desired language for the display. Use the
buttons to scroll between English, French, German, and Spanish.
Enter your selection by pressing the
Set the clock for the local time and date. If the time or the date
is correct as displayed, press the
next configuration setting. Time must be entered in 24-hour
format.
Press the <- and -> buttons to move left and right. Press the
and buttons to increase or decrease the value of each
B
selected digit. When the displayed value is correct, press the
button.
Set Time
time 14:51:38
<- ->
+
Powerware 9170 UPS User's Guide
®
Y
ESC
and
Y B
button.
button to advance to the
ESC
Rev B www.powerware.com
S
Y