Powerware 9170 User Manual page 25

6.
NOTE
need to place a thin steel plate under a corner.
bolts to level the cabinet.
7.
+
Powerware 9170 UPS User's Guide
®
After rolling the cabinet to its intended position, turn all four
caster bolts counter-clockwise until the cabinet rests on the
floor. Place a plastic cap into each bolt access hole.
If the floor is uneven and the cabinet is tilted or unstable, you may
After properly positioning and leveling the cabinet, insert power
and battery modules into the cabinet as described in "UPS
Startup" on page 63.
Rev B www.powerware.com
S
Installation Setup
Do not use the caster
17