Initial Startup Parameters - Powerware 9170 User Manual

3kva-18kva, 50 and 60 hz

Hide thumbs Also See for 9170:

Table of Contents

UPS Startup

Initial Startup Parameters

The first time the UPS is turned on, you must set or verify certain

operating parameters before placing the UPS into operation. Use the

following procedure to set these initial configuration parameters.

1. Enter the correct user security password: 0377. Move left and

right by pressing the buttons below the <- and -> on the

display. To change the value of the selected digit, press the

and

buttons. When the password shows 0377, press the

button.

2. Select the desired language for the display. Use the

buttons to scroll between English, French, German, and

Spanish. Enter your selection by pressing the

3. Set the clock for the local time and date. If the time or the date

is correct as displayed, press the

next configuration setting. Time must be entered in 24-hour

format.

Press the <- and -> buttons to move left and right. Press the

and

buttons to increase or decrease the value of each selected

digit. When the displayed value is correct, press the

button to advance to the

Powerware

9170 User's Guide

and

button.

www.powerware.com

Table of Contents