Parameters; Changing Parameter Settings; Reading The Powerware 9170+ System Logs - Powerware 9170 User Manual

Parameters

The parameters describe the Powerware 9170
Some useful parameters are input and output voltage, input and
output current, and battery voltage. The UPS measures or records
many other parameters. Some are operator-adjustable, such as the
local date and time and various operating limits. All parameters are
password-protected. Although every operating condition and parameter
is accessible through the front panel display, you may change a value
only
NOTE
active password level and returns to the normal running display.

Changing Parameter Settings

The method of changing any operating parameter follows the same
procedure as setting initial parameters, as described in "Initial Startup
Parameters" on page 72.
Use the Menu map (Figure 60 on page 85) to find the parameter you
need to change, and move through the menu structure until the
parameter name appears on the display.
Press the
screen automatically appears if permission is required for a particular
parameter. Enter the appropriate password, if applicable, and then
change the parameter value.
When you have changed the value, press the
change. To avoid making a change, press ESC instead of the
Reading the Powerware 9170
The Powerware 9170
sounds an alarm or runs on battery power. This information can help in
diagnosing power problems. You can display the UPS Inverter and Alarm
logs on the unit's front panel display; these logs are in menu 2.
+
Powerware 9170 UPS User's Guide
®
if you have entered the correct password to allow you to change it.
After 10 minutes of inactivity, the UPS automatically deletes any
button to access the parameter value. The Enter Password
+
System Logs
+
system makes an entry in its logs each time it
Rev B www.powerware.com
S
Operation
+
system operation.
button again to save the
button.
81