2 Getting started
This chapter helps you get started using data migration service by providing information on supported
configurations and instructions for setting up the hardware and software.
Supported configurations
This section describes and illustrates the supported topologies ( fabric and multipath), and lists the
supported fabric and array types.
Supported topologies
Supported topologies include fabric configuration and multipath configuration as described in this
section.
Fabric configuration
Figure 1
shows a typical setup for data migration with a dual-fabric high-availability (HA) configuration
with both array controller ports and one port from each MPX200 blade connected to each fabric.
This configuration enables the MPX200 to perform load balancing.
Figure 1 Single and dual blade high-availability setup
.
MPX200 Multifunction Router Data Migration
19