Display Current-Configuration - HP MSR Series Command Reference Manual

Examples
# Display configuration archive information.
<Sysname> display archive configuration
Location: flash:/archive
Filename prefix: my_archive
Archive interval in minutes: 120
Maximum number of archive files: 10
Saved archive files:
No. TimeStamp
1 Wed Jan 15 14:20:18 2012
2 Wed Jan 15 14:33:10 2012
# 3 Wed Jan 15 14:49:37 2012
'#' indicates the most recent archive file.
Next archive file to be saved: my_archive_4.cfg
Table 18 Command output
Field
Location
Filename prefix
Archive interval in minutes
Maximum number of archive files
Saved archive files
TimeStamp
Related commands
archive configuration
•
• archive configuration interval
archive configuration location
•
archive configuration max
•

display current-configuration

Use display current-configuration to display the running configuration.
Syntax
display current-configuration [ configuration [ module-name ] | interface [ interface-type
[ interface-number ] ] ]
Views
Any view
FileName
my_archive_1.cfg
my_archive_2.cfg
my_archive_3.cfg
Description
Absolute path of the directory for saving running-configuration
archives.
File name prefix for configuration archives.
Interval (in minutes) for the system to automatically archive the
running configuration.
If automatic configuration saving is disabled, this field is not
available.
Maximum number of configuration archives that can be saved.
Configuration archives that have been saved.
Time when the configuration archive was created.
161