Advanced Configuration Menu - Extron electronics ISM 482 User Manual

Advanced Configuration menu

Figure 3-10 is a flowchart that shows an overview of the Advanced Configuration
menu, the submenus, and the available settings.
Default
Cycle
Menu
10 sec.
Video & Audio
Configuration
Menu
Output
Configuration
Menu
Next
Advanced
Configuration
Menu
User Presets
Menu
Exit Menu
Menu
Press Next to Exit
Next
Default
Cycle
Figure 3-10 — Advanced Configuration menu flowchart
Select a test pattern
with the Adjust knob.
Select preview/program
off/on with the Adjust
knob.
10 sec.
Test Pattern
Color Bars
Next
Out #1 Out # 2
Off Off
Set test pattern type
• Color Bars • Alternating pixels
• Crosshatch • Film aspect 1.78
• 4x4 crosshatch • Film aspect 1.85
• Grayscale • Film aspect 2.35
• Crop • Ramp
Select the output 1 delay
with the Adjust knob.
Select the output 2 delay
with the Adjust knob.
RGB Delay
Next
Out #1 0.8 Seconds
Out #2 0.5 Seconds
10 sec.
Set the output 1 pixel phase
with the Adjust knob.
Set the output 2 pixel phase
with the Adjust knob.
Pixel Phase
Next
Out #1 Out # 2
000 000
10 sec.
Integration Scaling Matrix Switcher • Operation
Press an output button
to select an output.
Select blue mode with
Select top blanking with
the Adjust knob. the Adjust
Select edge smoothing
Select bottom blanking
with the Adjust knob. with the Adjust knob.
10 sec.
Blue Only Mode Output #1 Blanking
Off
Next
Edge Smoothing Top
Output #2 000
Display blue and sync only
• Off (default), Input 1,
Input 2, Both
Edge smoothing
• Off (default), Input 1,
Input 2, Both
Select auto imaging
with the Adjust knob.
Select auto presets Change this submenu
with the Adjust knob.
with either Adjust knob.
Auto Imaging
< >
Off On
Next
Auto Memories
< >
Off On
10 sec. 10 sec.
To reset the scaler, press and
Select an input. hold the Black button until
Set the PAL film mode the reset message appears.
on or off with either *Adjust knobs do not affect
Adjust knob. this submenu.
PAL Film Mode
Next
Input #2
< >
Off On
10 sec. 10 sec. 10 sec.
2
If necessary, select
another input and
repeat.
2
knob.
10 sec.
Bottom
000
Next
Enhanced Mode
< >
Off On
Next
Reset Unit?
Menu
Press and Hold
BLACK/MUTE
To Reset
Next
3-11