Video & Audio Configuration Menu; Input Configuration Submenu - Extron electronics ISM 482 User Manual

Operation, cont'd
Video & Audio Configuration menu
Figure 3-8 is a flowchart that shows an overview of the Video & Audio
Configuration menu and the available settings.
Menu
Figure 3-8 — Input Configuration menu flowchart

Input Configuration submenu

Select an input to configure by pressing and releasing an input button. Rotate the
Adjust
video format (RGB, RGBcvS, YUVi, YUVp, Betacam 50, Betacam 60, HDTV, S-video,
or composite video) for the selected input. Rotate the Adjust knob to select the
audio gain or attenuation value, from -24 dB to +9 dB. The default for each input is
RGB video and a 0 dB audio level.
3-8 Integration Scaling Matrix Switcher • Operation
From any menu or submenu, after 10 seconds of inactivity, the ISM saves all
adjustment settings and times out to the default LCD display cycle.
Default
Cycle
Menu
10 sec.
Video & Audio
Next
Configuration
Menu
Input Configuration:
Select an input to configure
Output
by pressing an Input button.
Configuration
Menu
Rotate the
Advanced
the video type.
Configuration
• RGB
Menu • RGBcvS
• YUVi
• YUVp
User Presets
• Betacam 50
Menu
Exit Menu
Press Next to Exit
Next
knob while in the Input Configuration submenu to select the correct
10 sec.
Next
Video/Audio Config
Input #1 Composite
Menu
Audio #3 Level -12db
1
1
knob to select Rotate the knob to select
the audio level.
Input video type Input audio level
-24dB to +9dB
• Betacam 60
• HDTV
• S-video
• Composite
NOTE The audio is broken
away in this example.
2
Input Configuration:
If necessary, select
another input and
repeat. 2