Extron electronics ISM 482 User Manual page 56

Programmer's Guide, cont'd
Command/response table for SIS commands (cont'd)
Command
Executive mode
Enable (lock image adjustments) 1X
Disable
View the executive mode status
Example:
Verbose mode
The default for verbose mode is on for the RS-232 connection and off for Ethernet connections.
Disable (block reports)
Disable verbose mode blocks reports for front panel operations only to this connection (RS-232
or Ethernet) only. The ISM continues to send responses to SIS commands to all ports. The ISM
continues to send reports for front panel operations to other connections.
Enable (allow reports)
View the executive mode status
Example:
Information requests
Query firmware version number Q
Request part number
Request general information
The response to the View File Directory command differs, depending on whether the command is
sent via an RS-232 or Telnet connection or sent via a Web browser connection.
View file directory (RS-232)
View file directory (Web)
4-12 Integration Scaling Matrix Switcher • Programmer's Guide
ASCII Command Response
(host to switcher) (switcher to host)
Exe1
0X Exe0
X
X3
X 0
0CV Vrb0
Esc
1CV Vrb1
Esc
CV
Esc X3
CV 1
Esc
x.xx
N zz-zzz-zz
I (See below)
X2
Vid
DF filename date/time length
Esc
filename date/time length
filename date/time length
filename date/time length
nnnn Bytes Left
DF Switcher response
Esc
File [1] = 'filename1, date1, filesize1';
File [2] = 'filename2, date2, filesize2';
File [3] = 'filename3, date3, filesize3';
File [4] = 'filename4, date4, filesize4';
File [n] = 'filenamen, daten, filesizen';
Additional description
Lock front panel adjustments;
adjust image via RS-232 only.
Adjustments & selections can
be made from the front panel.
Show executive mode status.
Executive mode is off.
Turn off verbose mode. The ISM
does not send the reports listed
in switcher-initiated messages
earlier in this chapter.
Turn on verbose mode. The ISM
sends all reports.
Show verbose mode status.
Verbose mode is on (the ISS
issues reports).
Show the controller firmware
version.
Show the ISM's part #.
Show the ISM's status.
•Aud •Frz •Hrt •Vrt
X1 X1 X3 X25
•Std
X25 X26