Rs-232 Connection; Configuration - Extron electronics ISM 482 User Manual

Installation, cont'd

RS-232 connection

7
Figure 2-9 — Remote port pin assignments

Configuration

The ISM can be configured using either the front panel controls, the SIS, or the
Windows Control program. See chapter 3, Operation, chapter 4, Programmer's Guide,
and chapter 5, Switcher Software.
2-8 Integration Scaling Matrix Switcher • Installation
Remote port — Connect a host device, such as a computer or touch panel
control, to the Integration Seamless Matrix switcher via this 9-pin D connector
for serial RS-232 control (figure 2-9).
Pin RS-232 Function
1 — Not used
2 TX Transmit data
3 RX Receive data
4 — Not used
5 Gnd Signal ground
6 — Not used
7 — Not used
8 — Not used
9 — Not used
See chapter 4, Programmer's Guide, for definitions of the SIS commands and
chapter 5, Switcher Software to install and use the control software.
5 1
9 6
Female
1 5
6 9
Male