Avaya one-X 9600 Series Installation And Maintenance Manual page 60

Troubleshooting Guidelines
Table 2: Parameter Values (continued)
Name
Bluetooth
Adapter
Proxy Server
Voice Language
File
Scroll Right to see the following additional parameters/values:
Phone
Call server
Supplicant
Pass-thru
Router
Mask
File server
802.1Q
VLAN ID
VLAN Test
60 9600 Series IP Telephones Release 3.0 Installation and Maintenance Guide
System Value
ccccccccccccccccccccc
ccccccccccc
WMLPROXY
NVVOXFILE
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
ccccccccccccccccc
ccccccccccccccccc
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
cccc
cccc
ccc
Format
Up to 32 ASCII characters. Software
version (including CSR) for the Bluetooth®
adapter, if applicable.
Proxy server used for WML functions.
Language file (NVVOXFILE) designated for
voice-initiated dialing.
Telephone IP Address; IPADD value.
IP Address of the call server currently in
use, otherwise "0.0.0.0."
Text equivalent of DOT1XSTAT: if 0,
Disabled; if 1, Unicast-only; if 2, Unicast/
multicast.
Text equivalent of DOT1X; if 0, Enabled; if
1, Enabled w/Logoff; if 2, Disabled.
Up to 15 ASCII characters:
the IP Address of the router in use.
Up to 15 ASCII characters:
NETMASK value.
IP Address of last file server used
successfully during initialization or "0.0.0.0"
if no file server was used successfully.
Text string corresponding to the NVL2Q
value.
Up to 4 ASCII characters. Value is
L2QVLAN text "Auto" if 802.1Q tagging is 0
or "On" if 802.1Q tagging is 1. If 802.1Q
tagging is off (2), this line is not displayed.
Up to 3 ASCII characters. Value is
VLANTEST value if 802.1Q tagging is 0 or
1. If 802.1Q tagging is off (2), this line is not
displayed.
2 of 3