Avaya one-X 9600 Series Installation And Maintenance Manual page 33

During Normal Telephone Operation (all 9600 IP Telephones except the 9610):
1. Invoke all local procedures by pressing the Mute button, entering the local (dialpad)
procedure password (0 to 7 numeric digits), then pressing the # button.
A 6-second timeout is in effect between button presses after pressing the Mute button. If
you do not press a valid button within 6 seconds of pressing the previous button, the
collected digits are discarded. In this case, no administrative option is invoked.
The entry is compared to the PROCPSWD value. If they match, the telephone displays the
Craft Local Procedure screen, and prompts "Select procedure and press Start."
2. Use the navigation arrows to scroll to and highlight the local procedure you want, then press
Start or OK. Or scroll to the procedure you want and press the corresponding line button.
During Normal Telephone Operation (9610 IP Telephone only):
1. Invoke all local procedures by displaying the Contacts application and pressing the
Contacts button.
Note:
If the Contacts application is not displayed, press the Contacts button twice and
Note:
proceed to the next step.
2. Enter the local (dialpad) procedure password (PROCPSWD, 0 to 7 numeric digits), then
press the # button.
Note:
A 6-second timeout is in effect between button presses after pressing the
Note:
Contacts button. If you do not press a valid button within 6 seconds of pressing
the previous button, the collected digits are discarded. In this case, no
administrative option is invoked.
The entry is compared to the PROCPSWD value. If they match, the telephone displays the
Craft Local Procedure screen and prompts "Select procedure and press Start."
3. Use the navigation arrows to scroll to and highlight the local procedure you want, then press
Start or OK. Or scroll to the procedure you want and press the corresponding line button.
Accessing Local (Craft) Procedures
Issue 6 February 2009 33