Assembling The 9600 Series Ip Telephone; Powering The 9600 Series Ip Telephone - Avaya one-X 9600 Series Installation And Maintenance Manual

9600 Series IP Telephone Installation
14. Verify that the 9600 Series IP Telephone package includes the following components:
1 telephone set with pre-attached stand.
1 handset capable of transmitting and receiving 7KHz audio.
1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, plugged into the
telephone and the handset.
1 Category 5 modular line cord for the connection from the IP telephone to the Ethernet
wall jack.
9630G/9640G Models (only) also include 1 DC power cord with a barrel connector for
use with the 1151 auxiliary power supply.
Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Safety Instructions.
Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Stand Instructions.
Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Wall Mount
Instructions.
Note:
For sites using headsets, the 9600 Series IP Telephones support only the HIS
Note:
headset cords. See your Avaya representative for information.

Assembling the 9600 Series IP Telephone

!
CAUTION:
Be careful to use the correct jack when plugging in the telephone. The jacks are
CAUTION:
located on the back of the telephone housing and are flanked by icons to
represent their correct use.

Powering the 9600 Series IP Telephone

All 9600 Series IP Telephones can be locally powered with a Telephone Power Module (DC
power jack), available separately. In addition, all 9600 Series IP Telephones support IEEE
802.3af-standard LAN-based power. Before installing a 9600 Series IP Telephone, verify with
the LAN administrator whether the LAN supports IEEE 802.3af, and if so, whether the
telephone should be powered locally or by means of the LAN.
When you add devices like multiple button modules or a Bluetooth™ adapter to applicable 9600
Series IP Telephones, the power class may change.
on the power class. For Power Class 2, set the switch labeled IEEE to L. For Power Class 3, set
the switch labeled IEEE to H.
Note:
The 9610 and 9620L are PoE Class 1 devices and do not have an IEEE power
Note:
switch.
16 9600 Series IP Telephones Release 3.0 Installation and Maintenance Guide
Table 1 shows the effect of such additions